Ply-Guard AS

Ply-Guard AS is a fast-curing, two-component polyaspartic coating system. Ply-Guard AS exhibits superior color and gloss retention, excellent abrasion resistance, and can be applied by sprayer or rollers directly to properly prepared concrete or metal surfaces.

In addition, Ply-Guard AS has very good corrosion, chemical, and UV resistance, and can achieve a uniform coating thickness of 8 mils WFT per coat.

Ply-Guard AS is also available in a High Solids or Extended Pot Life (EPL).

Key Features

• Low-temperature cure (as low as 0°F / -34°C)
• O VOC (with exempt solvent)
• Self-priming, excellent penetration and bond strength
  
• Excellent abrasion, impact, and wear resistance
  
• Excellent color and gloss retention
  
• Excellent resistance to chemicals and stains
• UV-resistant; optical clarity of clear sealer/finish

Technical Data

• 1:1 Mix Ratio
• 5-7 mils DFT, 185-200 sqft per gallon
• Low-temperature cure as low as 0°F
• Recoat time: 8-10 hours (max. 16 hours)
• Walk-on time: 4 hours
  
• Drive-on time: 48 hours

Packaging

• 2-Gallon Kits
• 10-Gallon Kits