Products Construction - Expansion Joint Systems & Components
Ply-Krete® Joint Systems
Roll over the components for more information |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
 |
 |
|
|
Ply-Seal® Joint Seal
Ply-Seal is a pre-formed, low-density, closed cell, crossed-linked, nitrogen blown polyethylene material. Ply-Seal is used as a flexible joint seal that is waterproof and chemical resistant. Ply-Seal is compatible with construction materials and resistant to abrasion, oxidation, oils, gasoline, salt and other materials that may come in contact with the surface. Conforms to ASTM D-1056, Type 2 Class B, Grade 3
Substrate
Concrete, Steel, Wood, Asphalt or other construction material
Ply-Krete®
Ply-Krete® Joint System consists of Ply-Krete® FS, a High Strength, fast setting, elastomeric concrete nosing material and Ply-Seal®, a waterproof joint seal. This system is one of the best systems available for Bridge Joints. This joint system is designed to preserve and protect concrete decks and substructures by preventing water absorption and minimizing chloride intrusion in the most abusive environments.
|
|
Ply-Krete® Joint Systems
The Ply-Krete® 350 Joint Systems consist of a high strength, moisture insensitive, elastomeric concrete nosing material and Ply-Seal, a waterproof joint seal. This is one of the best systems available for Bridge Joints. The ‘toughness-factor' of the Ply-Krete® Systems are second to none. These joint systems are designed to preserve and protect concrete decks and substructures by preventing water absorption and minimizing chloride intrusion in the most abusive of environments. When higher elongation is required, the Ply-Krete® 250 Joint Systems offer Ply-Seal XE as an alternate Joint Seal material. See the table below for products that meet your specific needs.
|
 |
|
Ply-Seal Joint Systems
Ply-Seal Joint Systems are closed-cell, waterproof, chemical resistant, flexible joint seals designed for bridges, parking structures, wastewater treatment facilities, airports, and other commercial structures. Allows high movement in adverse environmental conditions.
|
 |
|
Ply-Seal
Ply-Seal is a pre-formed, low-density, closed cell, crossed-linked, nitrogen blown polyethylene material. Ply-Seal is used as a flexible joint seal that is waterproof and chemical resistant. Ply-Seal is compatible with construction materials and resistant to abrasion, oxidation, oils, gasoline, salt and other materials that may come in contact with the surface. Conforms to ASTM D-1056, Type 2 Class B, Grade 3
|
 |
| Product Name |
Features |
| Ply-Seal® |
Highest Temperature Resistance; Non-EVA |
| Ply-Seal® XE |
Higher Ultimate Elongation |
| Ply-Seal® XE Beige |
Contains HALS for UV Stabilization |
| Ply-Seal® FG |
Full Depth Forming Waterproof Seal |
|
Ply-Krete®
Ply-Krete® is a unique two component, modified elastomeric concrete developed for use in highly aggressive environments due to mechanical, chemical and weather conditions such as bridge expansion joint end dams and other aggressive construction applications. Ply-Krete® has excellent adhesion to steel, concrete and asphalt. The compound (without aggregates) may also be used as a high performance coating/primer for various substrates (concrete and steel, etc.) giving long term protection in very adverse environments.
|
 |
| Product Name |
Features |
Applications |
| Ply-Krete® FS |
Economical, Fast Setting |
Best all-purpose nosing system |
| Ply-Krete® 2615 |
Enhanced Physical Properties |
Where higher elongation & tensile strength are required |
| Ply-Krete® LV |
Moisture Insensitive, Low Viscosity |
Where the installation conditions dictate a moisture insensitive material |
| Ply-Krete® NS |
Moisture Insensitive, Non-Shrinking |
Where highest compressive strength is required |
| Ply-Krete® FE |
Highest Elongation available |
For use in extreme environments |
|
Ply-Bonder
Ply-Bonder is the recommened adhesive to complete the Ply-Krete® Joint system.
Ply-Bonder is a 100% solids, moisture insensitive, two component,modified epoxy adhesive, developed for the construction industry for bonding various construction materials to cured concrete in high stress applications. The material has excellent adhesion to steel, concrete, wood, and other construction materials. Meets ASTM C-881, Type I & II, Grade 2, Class B & C.
|
 |
|
|
|
